- Order number: 44.10.0003.1000.102
- Note: Sheetware - width ca. 300-310mm
- Info: Larger dimensions on request!
Sheet - Foil of Carbon steel (C- Steel)
Precision sheets / underlay made of carbon steel 1095 (C100S) - 1.1274 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions.
Properties material 1.1274
With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements.
Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1.1274 is also suitable for high mechanical loads and has a high fatigue strength.
Technical information
The thickness tolerance is defined according to DIN EN 9445 table 1 or T3.
The material 1.1274 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines.
The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness.
The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently.
Further applications / properties:
- Wear strips
- Printing racks
- very easy to etch
- magnetizable
| Material: | Carbon Steel |
| Thickness: | 0,03 mm |
| Length: | 1000 mm |
| Width: | 300 - 310 mm |
| DIN Material - Name: | C100S+QT |
| Alloy: | Ck101 |
| Material - Number: | 1.1274 |
| ASTM/AISI (USA): | 1095 |
| Surface: | white polished |
| Delivery - State: | hard |
| Norm: | DIN 10204 |
| Magnetisable: | yes |
| Structure: | gehärtet und angelassen (martensitisches Gefüge) |
| Thickness Tolerance: | T3 |
| Tensile Strenght: | 20-2200 N/mm² |
Besser geht es nicht.
Lieber Metallstor 24
Für mich als Musikinstrumentenbauer ist die Qualität des Stahls sowie der Oberfläche von entscheidender Bedeutung für seine Klangeigenschaft.
Obwohl ich Kleinstkunde bin, wurde ich gut beraten und meine "pinigeligen" Sonderwünsche wurden zu meiner vollsten Zufriedenheit erfüllt.
Es ist toll das ich hier kleine Mengen bekomme und nicht gleich eine ganze Mage kaufen muss.
Ich möchte mich auch für das mir entgegengebracht Vertrauen bedanken.
Ich kaufe gerne wieder bei Ihnen.
Allzeit gute Geschäfte.
T. Tschernich
Klasse für 3D Drucker
Nach einer Anfrage wurde mir dieser Federstahl für die Herstellung flexibler magnetischer Druckbetten empfohlen. Ich bin sehr zufrieden!
Perfect!
perfekt egklappt
1A
Good for guitar / ukulele side bending!
I use this steel for bending sides for my ukuleles. Works really well for this purpose. Bending tight radiuses is no problem. The steel always springs back to flat. Only thing to concern is rust. So keep it away from water as good as possible.
Uferstraße 44
93158 Teublitz
Deutschland
Uferstraße 44
93158 Teublitz
Deutschland
