Steel Sheets (1.0338) 500 x 150 mm - (5 pc./PU)
Non-alloyed steels are very low-cost materials for simple parts with no demands on corrosion resistance and mechanical loads. As a rule, this special grade (DC04) is used, for example, for simple automotive parts both indoors and outdoors. The material DC 04 is magnetizable and can therefore be clamped very well on magnetic clamping plates of surface grinding machines. This steel is not corrosion resistant and must be protected against corrosion by galvanizing, tinning, chrome plating or painting. Further Applications / Properties: body panels furniture fittings painted sheet metal panels very good etchable very good weldability suitable for punching
Content: 0.375 m² (€115.07 / 1 m²)
Steel Sheet (1.0338) 500 x 150 mm
Non-alloyed steels are very low-cost materials for simple parts with no demands on corrosion resistance and mechanical loads. As a rule, this special grade (DC04) is used, for example, for simple automotive parts both indoors and outdoors. The material DC 04 is magnetizable and can therefore be clamped very well on magnetic clamping plates of surface grinding machines. This steel is not corrosion resistant and must be protected against corrosion by galvanizing, tinning, chrome plating or painting. Further Applications / Properties: body panels furniture fittings painted sheet metal panels very good etchable very good weldability suitable for punching
Content: 0.075 m² (€161.07 / 1 m²)
Steel Sheet DC04 (1.0338) 150 mm x 5 Meter
Non-alloyed steels are very low-cost materials for simple parts with no demands on corrosion resistance and mechanical loads. As a rule, this special grade (DC04) is used, for example, for simple automotive parts both indoors and outdoors. The material DC 04 is magnetizable and can therefore be clamped very well on magnetic clamping plates of surface grinding machines. This steel is not corrosion resistant and must be protected against corrosion by galvanizing, tinning, chrome plating or painting. Further Applications / Properties: body panels furniture fittings painted sheet metal panels very good etchable very good weldability suitable for punching
Content: 5 Meter (€14.63 / 1 Meter)
Sheet steel DC04 unalloyed (1.0338) approx. 300 mm x 1000 mm
Non-alloyed steels are very low-cost materials for simple parts with no demands on corrosion resistance and mechanical loads. As a rule, this special grade (DC04) is used, for example, for simple automotive parts both indoors and outdoors. The material DC 04 is magnetizable and can therefore be clamped very well on magnetic clamping plates of surface grinding machines. This steel is not corrosion resistant and must be protected against corrosion by galvanizing, tinning, chrome plating or painting. Further Applications / Properties: body panels furniture fittings painted sheet metal panels very good etchable very good weldability suitable for punching
Laser Cutting
Laser parts - laser cutting - inquire online Individual product production of laser cutting parts according to your specifications. With a sketch, a drawing or a DXF file you can use our online form to inquire, request a quote and order. We manufacture for both private and business customers. We cut individual pieces or small series for you up to a size of 20 x 40cm (other dimensions on request) from sheet metal 0.05 - 2mm thick (other dimensions on request). Various materials such as stainless steel, copper, brass, bronze etc. can be processed with our lasers.
Factory certificate - acceptance test certificate
With our products we guarantee you the highest quality standards. In order to secure this guarantee for your customers, we offer tool certificates 2.2 and acceptance test certificates 3.1 according to DIN EN 10204 for purchase for our metals. There are several ways you can do this. We will show these in more detail in the following article. The nature of materials (e.g. mechanical properties) is not always recognizable at first glance. As in product piracy, for example. Unfortunately, this also happens with metals because it is difficult to see whether the materials can meet the requirements. This also means that test seals and product names are sometimes forged. For this reason, unspecific factory certificates and special acceptance test certificates have been introduced, which are created for each order. We would also like to point out that our materials undoubtedly meet the highest quality standards. We can also issue a factory or acceptance test certificate at any time for intermediaries who have the burden of proof that the quality has been properly maintained. In this way we guarantee in writing that the materials have been delivered in accordance with the requirements of your order. The certificates contain the following information:- Description of the material such as B. Alloy, dimensions, weight, etc.- Chemical analysis (percentage of chemical elements)- Mechanical properties such as B. Tensile Strength Differences between the test certificates (DIN EN 10204)A distinction is made between four types of certificates, all of which prove the confirmation of the conformity of the order (source: Beuth Verlag) Type of content of the certificate Confirmation of the certificate 2.1 Factory certificate Confirmation of compliance with the order Manufacturer 2.2 Factory certificate Confirmation of compliance with the order stating the results of non-specific tests Manufacturer 3.1 Acceptance test certificate Confirmation of compliance with the order stating the results of specific tests The manufacturer's inspection officer, who is independent of the production department 3.2 Acceptance test certificate Confirmation of compliance with the order stating the results of specific tests The manufacturer's acceptance officer who is independent of the production department and the acceptance officer commissioned by the customer or the acceptance officer named in the official regulations - The works certificate (2.1) and the works certificate (2.2) are issued directly by the manufacturer. - The acceptance test certificate (3.1) is confirmed by the manufacturer's independent acceptance officer. - The acceptance certificate (3.2) is confirmed by the manufacturer's acceptance officer who is independent of the production department and by the acceptance officer commissioned by the purchaser or the acceptance officer named in the official regulations. Important!Factory certificates and acceptance test certificates according to DIN EN 10204 are not automatically supplied. These must be ordered separately for a surcharge.