Factory certificate - acceptance test certificate
With our products we guarantee you the highest quality standards. In order to secure this guarantee for your customers, we offer tool certificates 2.2 and acceptance test certificates 3.1 according to DIN EN 10204 for purchase for our metals. There are several ways you can do this. We will show these in more detail in the following article. The nature of materials (e.g. mechanical properties) is not always recognizable at first glance. As in product piracy, for example. Unfortunately, this also happens with metals because it is difficult to see whether the materials can meet the requirements. This also means that test seals and product names are sometimes forged. For this reason, unspecific factory certificates and special acceptance test certificates have been introduced, which are created for each order. We would also like to point out that our materials undoubtedly meet the highest quality standards. We can also issue a factory or acceptance test certificate at any time for intermediaries who have the burden of proof that the quality has been properly maintained. In this way we guarantee in writing that the materials have been delivered in accordance with the requirements of your order. The certificates contain the following information:- Description of the material such as B. Alloy, dimensions, weight, etc.- Chemical analysis (percentage of chemical elements)- Mechanical properties such as B. Tensile Strength Differences between the test certificates (DIN EN 10204)A distinction is made between four types of certificates, all of which prove the confirmation of the conformity of the order (source: Beuth Verlag) Type of content of the certificate Confirmation of the certificate 2.1 Factory certificate Confirmation of compliance with the order Manufacturer 2.2 Factory certificate Confirmation of compliance with the order stating the results of non-specific tests Manufacturer 3.1 Acceptance test certificate Confirmation of compliance with the order stating the results of specific tests The manufacturer's inspection officer, who is independent of the production department 3.2 Acceptance test certificate Confirmation of compliance with the order stating the results of specific tests The manufacturer's acceptance officer who is independent of the production department and the acceptance officer commissioned by the customer or the acceptance officer named in the official regulations - The works certificate (2.1) and the works certificate (2.2) are issued directly by the manufacturer. - The acceptance test certificate (3.1) is confirmed by the manufacturer's independent acceptance officer. - The acceptance certificate (3.2) is confirmed by the manufacturer's acceptance officer who is independent of the production department and by the acceptance officer commissioned by the purchaser or the acceptance officer named in the official regulations. Important!Factory certificates and acceptance test certificates according to DIN EN 10204 are not automatically supplied. These must be ordered separately for a surcharge.
Carbon Sheet 1095 ca.155 x 1000mm
Sheet - Foil of Carbon steel (C- Steel) Precision sheets / underlay made of carbon steel 1095 (C100S) - 1.1274 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1.1274 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1.1274 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1.1274 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Spring plates - C100S 500 x 100 mm - (5 pieces/PU)
Sheet - Foil of Carbon steel (C- Steel) Precision sheets / underlay made of carbon steel 1095 (C100S) - 1.1274 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1.1274 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1.1274 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1.1274 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 0.25 m² (€113.44 / 1 m²)
Feeler gauge tape 1095 - 6 mm x 5 Meter
Precision feeler gauge tape Precision tapes / backing foils made of carbon steel C100S - 1095 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1095 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1095 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1095 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 5 Meter (€2.00 / 1 Meter)
Carbon Steel Tape 1095 - 25 mm x 5 Meter
Precision feeler gauge tape Precision tapes / backing foils made of carbon steel C100S - 1095 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1095 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1095 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1095 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 5 Meter (€6.57 / 1 Meter)
Carbon Sheet 1095 ca.508 x 1000mm
Sheet - Foil of Carbon steel (C- Steel) Precision sheets / underlay made of carbon steel 1095 (C100S) - 1.1274 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1.1274 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1.1274 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1.1274 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Feeler gauge tape 1095 - 12,7 mm x 5 Meter
Precision feeler gauge tape Precision tapes / backing foils made of carbon steel C100S - 1095 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1095 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1095 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1095 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 5 Meter (€5.70 / 1 Meter)
Carbon Steel Tape 1095 - 50 mm x 5 Meter
Precision feeler gauge tape Precision tapes / backing foils made of carbon steel C100S - 1095 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1095 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1095 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1095 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 5 Meter (€9.47 / 1 Meter)
Carbon Steel 1095 - 25 x 300 mm - 10 pc./PU
Sheets - Foils of Carbon steel (C- Steel) Precision sheets / underlay made of carbon steel C100S - 1095 are used among others in mechanical engineering as underlay foils, for aligning workpieces in grinding machines or for setting and measuring gap dimensions. Properties material 1095 With a carbon content of over 1%, this material is very well suited for feeler gauges and underlay foils as well as for highly stressed springs, which are not subject to any corrosion requirements. Compared to the materials 1.1231 (C67S), 1.1248 (C75S) and 1.1269 (C85S), which have a lower carbon content, the material 1095 is also suitable for high mechanical loads and has a high fatigue strength. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3. The material 1095 is magnetizable and can therefore be clamped on magnetic chucks of grinding machines. The structure of the strip is changed by the hardening process. This means that the rolling direction does not have to be taken into account when edging. Bending radius: at least 10 times the strip thickness. The unalloyed steels must be estimated from corrosion by an oil film. Tinning or galvanizing or painting these steels can withstand corrosion permanently. Further applications / properties: Wear strips Printing racks very easy to etch magnetizable
Content: 0.075 m² (€242.13 / 1 m²)