Go to homepage
€0.00

Stainless Steel Sheet - Foil (316L - hard) ca.100 x 1000mm

Skip image gallery
% Larger quantities on request!
Kovar Sheet
Alloy K Foil
Kovar Sheet
Alloy K Foil

€29.37*

Content: 1 Meter

4 Reviews

Available in 3 days, delivery time 1-2 days

x

Privacy
Product number: 34.10.0001.1000.100
Notice: LxW ca. 100 x 1000 mm
Info: Special discount on larger quantities!

Technical Information - Stainless Steel 316L

  • cold-rolled, rust-resistant Spring Steel 316L
  • cold-rolled, rust-resistant Steel 316L annealed

Basic information and applications 316L

Due to the addition of molybdenum of 2.0 to 2.5% and an increased nickel content of over 10%, this material is very good corrosion-resistant and suitable for applications in the food industry as well as environmental and partly in medical technology.

Further application examples: welded endless belts, conveyor belts in a corrosive environment

The material 316L is approved as spring material according to DIN 17 224 (new: DIN EN 10 151).

Delivery condition hard rolled

Structure: cold-rolled (austenitic with small proportions of forming martensite), not hardenable
Surface: 2H, roughness Ra maximum 0.3 µm (impression of the work roll)
Tensile strength: 1100 to approx. 1300 N / mm²

The tensile strength can be increased by tempering the steel at 330-370 ° C (about 4 hours) by about 100 N / mm² (depending on the original strength of the material).

Delivery condition soft annealed

Structure: purely austenitic
Surface: 2B or 2R, roughness Ra maximum 0.3 µm (impression of the work roll)
Tensile strength: 500-800 N / mm²

Tolerances

Thickness tolerance: DIN EN 9445 table 1
Width tolerance: according to DIN EN 9445
Straightness: normal
Flatness: wave height max. 1.0 mm

Further mechanical information

Yield strength Rp0.2: dependent on tensile strength
Elongation A 80: depending on the tensile strength

The following values ​​apply to the hard-rolled version:

With good edge processing after cutting (e.g. by surface grinding), the fatigue strength is about 35% of the tensile strength, with a bend perpendicular to the rolling direction.

Because the fatigue strength depends on various factors such as the ambient conditions and the edge properties, no values ​​can be guaranteed.

Depending on the load, the highest application temperature is between 120 and 250 ° C (cf. DIN 17224 - spring band made of stainless steel). Please note that the elastic modulus values ​​decrease with increasing temperature.

Alloy Designations

German Norm: 1.4404 / X2CrNiMo18-12-2
AISI: 316L
ASTM: S 31603
Engl. Norm: 316S11
Franz. Norm: Z 3 CND17-11-02
Japan. Norm: SUS 316

Material - Composition *

C: max. 0,03 %

Si:

 max. 1,000 %
Mn: max. 2,00 %
P: max. 0,045 %
S: max. 0,030 %
Cr: 16,5 - 18,5 %
Ni: 10 - 13 %
Mo: 2,0 - 2,50 %
N: max. 0,11 %

* for the exact composition can be documented in the form of a test certificate 2.2 or 3.1 (according to DIN 10 204) for each batch.

Physical Information

Density: ca. 7,95 g/cm³
Heat conduction: 15 W/(m °C) depending on the temperature
Heat capacity: 500 J/(kg °C) average values at 50 - 100 °C
Thermal expansion:

16,0x10 -6 (between 30 - 100 °C)

16,5x10 -6 (between 30 - 200 °C)

17,0x10 -6 (between 30 - 300 °C)
Electrical resistance: 0,75 Ohm x mm²/m
Modulus of elasticity: 180 000 MPa at 20°C
Relative permeability µr: usually less than 1.02 in the annealed condition (at 200H) - significantly higher in the hard-rolled condition, but less than in the material 1.4310 (cf. there)

Processing information 316L

Punching: stainless steel 316Lis easy to punch. When annealed, this material can even be deep drawn due to the high nickel content of over 10%.

Laser cutting: The material can be laser cut very well.

Etching: The material 316L is very easy to etch.

Bending in the hard-rolled state: Since the strength of the material is achieved through the cold forming during rolling, the rolling direction has a major influence on the bending.

Bending transversely (perpendicular) to the rolling direction:

to 0,25 mm 2,5 x t
0,25 - 0,50 mm 3,0 x t
0,50 - 075 mm 4,5 x t
0,75 - 1,00 mm not recommended

 t = thickness

Bending lengthways (parallel) to the rolling direction:

to 0,25 mm 8,0 x t
0,25 - 0,50 mm 11,0 x t
0,50 - 0,75 mm 14,0 x t
0,75 - 1,00 mm not recommended

 t = thickness

Bending in the annealed condition: Due to the high nickel content of more than 10%, the material 316L can be folded and annealed very well in the annealed condition.

Surface grinding: 316L has a purely austenitic structure in the annealed condition and is therefore not magnetizable.
In the hard-rolled state, material 316L is only weakly magnetizable and cannot be clamped on magnetic chucks of grinding machines.

Welding: Like other austenitic, stainless steels, very easy to weld. At the weld seam, the heat input in the hard-rolled state can lead to a structural change that reduces the strength there.
Due to the very low carbon content of max. On the material side, corrosion of the weld seam is not expected.

Chemical resistance 316L

Assignment in group 5 of the stainless steel table to the chemical resistance of stainless steels (see www.nirosta.de/Publications). This material is therefore more resistant to corrosion than materials 1.4310 (group 4) and materials 1.4034 and 1.4031Mo, both of which are in group 1. Nirosta is a registered trademark of TyssenKrupp AG.

Please check there or through a test whether the material 1.4404 is sufficient is stable for your application. The material 1.4529 is available for very corrosive environments (in hard-rolled condition in thicknesses of 0.05-0.50mm and in soft condition in thicknesses of 0.15-0.50mm)

Important NOTE

The technical information listed above or the information provided on the nature or use of the materials serve for description and are not a guarantee of properties. The information with which we want to advise you corresponds to our experience and that of our upstream suppliers. We cannot guarantee the results of processing and application. (03/2024)

thickness 0,05 - 0,3mm
width 150mm
Bronze foils - bronze sheets
Bronze Foils CW452K 150 x 500 mm - (5 pc./PU)

Bronze Foil - Bronze Sheet Bronze is an alloy of copper (Cu) and tin (Sn). A distinction is made between wrought and cast alloys depending on the processing. Typical application examples are connectors, contact pins, as well as general stamped and bent parts and springs, where good electrical conductivity is necessary In contrast to brass, bronze can also be used in vacuum technology. Properties material CW452K - 2.1020 The bronze alloy CW452K - also called two-alloy - is the most frequently used type of bronze with a tin content of approx. 6%. The alloy CW452K is characterized by a particularly favorable combination of cold formability, strength and hardness. In addition, bronze is very corrosion and wear-resistant as well as seawater-resistant and has good tinnability. Technical information Bronze cannot be magnetized and therefore cannot be clamped on grinding machines. Bronze plates can be laser cut well and are very easy to etch. CuSn6 is easy to weld with all processes. However, the heat input at the weld seam can lead to a structural change that reduces the strength. Bronze is very suitable for soft soldering. The high strength of the bronze plates or the material is achieved by cold forming during rolling. Therefore, the direction of rolling has a great influence on bending. Other applications / properties:

Content: 0.375 m² (€132.40 / 1 m²)

From €39.88
Details
thickness 0,05 - 0,3mm
width 150mm
Bronze foil
Bronze Foil CW452K 150 mm x 5 Meter

Bronze Foil - Bronze Sheet Bronze is an alloy of copper (Cu) and tin (Sn). A distinction is made between wrought and cast alloys depending on the processing. Typical application examples are connectors, contact pins, as well as general stamped and bent parts and springs, where good electrical conductivity is necessary In contrast to brass, bronze can also be used in vacuum technology. Properties material CW452K - 2.1020 The bronze alloy CW452K - also called two-alloy - is the most frequently used type of bronze with a tin content of approx. 6%. The alloy CW452K is characterized by a particularly favorable combination of cold formability, strength and hardness. In addition, bronze is very corrosion and wear-resistant as well as seawater-resistant and has good tinnability. Technical information Bronze cannot be magnetized and therefore cannot be clamped on grinding machines. Bronze plates can be laser cut well and are very easy to etch. CuSn6 is easy to weld with all processes. However, the heat input at the weld seam can lead to a structural change that reduces the strength. Bronze is very suitable for soft soldering. The high strength of the bronze plates or the material is achieved by cold forming during rolling. Therefore, the direction of rolling has a great influence on bending. Other applications / properties: good corrosion resistance easy to solder easy to polish good cold formability good spring properties Use: springs of all kinds, metal hoses, etc. Application: paper, pulp, textile and chemical industry as well as in ship, machine and apparatus construction, tombstones

Content: 5 Meter (€19.06 / 1 Meter)

From €70.78
Details
thickness 0,05 - 0,3mm
width 150mm
Bronze sheet
Bronze Foil CW452K 150 x 500 mm

Bronze Foil - Bronze Sheet Bronze is an alloy of copper (Cu) and tin (Sn). A distinction is made between wrought and cast alloys depending on the processing. Typical application examples are connectors, contact pins, as well as general stamped and bent parts and springs, where good electrical conductivity is necessary In contrast to brass, bronze can also be used in vacuum technology. Properties material CW452K - 2.1020 The bronze alloy CW452K - also called two-alloy - is the most frequently used type of bronze with a tin content of approx. 6%. The alloy CW452K is characterized by a particularly favorable combination of cold formability, strength and hardness. In addition, bronze is very corrosion and wear-resistant as well as seawater-resistant and has good tinnability. Technical information Bronze cannot be magnetized and therefore cannot be clamped on grinding machines. Bronze plates can be laser cut well and are very easy to etch. CuSn6 is easy to weld with all processes. However, the heat input at the weld seam can lead to a structural change that reduces the strength. Bronze is very suitable for soft soldering. The high strength of the bronze plates or the material is achieved by cold forming during rolling. Therefore, the direction of rolling has a great influence on bending. Other applications / properties:

Content: 0.075 m² (€198.53 / 1 m²)

From €11.96
Details

Toleranzen & Zugfestigkeiten

In der folgenden Tabelle finden Sie detaillierte Informationen zur Dickentoleranz unserer Präzisionslehrenbänder sowie Unterlegfolien. Unsere rostfreien Fühlerlehrenbänder werden teilweise noch gemäß DIN EN 10258 P gefertigt. Bitte beachten Sie, dass bei einer Bandbreite von 600 mm aus technischen Gründen ausschließlich eine Dickentoleranz nach DIN EN 10258 P realisierbar ist. 

Die jeweiligen Zugfestigkeiten sind für jeden einzelnen Werkstoff spezifisch aufgeführt, sodass Sie eine verlässliche Grundlage für Ihre technische Auswahl erhalten. Sollten Sie zusätzlich Härtewerte nach Rockwell oder Vickers benötigen, können Sie entsprechende Richtwerte unserer Härtevergleichstabelle entnehmen.

Dicke (mm) Dickentoleranzen in mm (+/-) Zugfestigkeit (N/mm²)
T3 - Breite ≤305 T3 - Breite 320–400 EN 10140 - Kaltband EN 9445 -  Breite ~600 EN 9445 - Breite ≤1250 C-Stahl 1.1274 CrNi 1.4310 Messing 2.0321
0,0030,001---->1500
0,0050,001---->1500
0,0060,001---->1500>540
0,0080,002----
>1500
0,010,002---->1500>540
0,0150,002---->1500
0,020,002----2000–2200>1500>540
0,0250,002----2000–2200>1500>540
0,030,003----2000–2200>1500>540
0,0350,003----2000–2200>1500
0,040,003----2000–2200>1500>540
0,0450,003----2000–2200>1500
0,050,003----2000–2200>1500>540
0,0550,003----2000–2200>1500>540
0,060,003----2000–2200>1500>540
0,0650,004----2000–2200>1500>540
0,070,004----2000–2200>1500>540
0,0750,004----2000–2200>1500>540
0,080,004----2000–2200>1500>540
0,0850,004----2000–2200>1500>540
0,090,004----2000–2200>1500>540
0,0950,004----2000–2200>1500>540
0,100,004-0,0150,020,022000–2200>1500>540
0,110,004----1900–2200>1500>540
0,120,004----1900–2200>1500>540
0,130,005----1900–2200>1500>540
0,140,005----1900–2200>1500>540
0,150,005-0,020,020,021900–2200>1500>540
0,160,005----1900–2200>1500>540
0,170,005----1900–2200>1500>540
0,180,005----1900–2200>1500>540
0,190,005----1900–2200>1500>540
0,200,006-0,0250,020,021800–2200>1500>540
0,210,006----1800–22001500–1700>540
0,220,006----1800–22001500–1700>540
0,230,006----1800–22001500–1700>540
0,240,006----1800–22001500–1700>540
0,250,007-0,0250,030,031800–22001500–1700>540
0,260,007----1800–22001500–1700>540
0,270,007----1800–22001500–1700>540
0,280,007----1800–22001500–1700>540
0,290,007----1800–22001500–1700>540
0,300,007-0,030,030,031800–22001500–1700>540
0,350,008----1600–19001500–1700540–610
0,380,008----1600–19001500–1700540–610
0,400,009-0,030,0350,0351600–19001500–1700540–610
0,430,009----1600–19001500–1700540–610
0,450,009----1600–19001500–1700540–610
0,500,010-0,0350,040,041600–19001500–1700540–610
0,550,010----1600–19001500–1700540–610
0,600,010-0,0350,040,041600–19001500–1700540–610
0,650,012----1600–19001500–1700540–610
0,700,012-0,040,04-1600–19001500–1700540–610
0,750,012----1600–19001500–1700540–610
0,800,013-0,040,040,0451600–19001500–1700540–610
0,850,013----1600–19001500–1700540–610
0,900,016--0,04-1600–19001500–1700540–610
0,950,016----1600–19001500–1700540–610
1,000,0180,0180,040,040,0451600–19001500–1700440–540
1,100,0180,018---1600–19001300–1500540–610
1,200,0180,022---1600–19001300–1500540–610
1,300,0200,022---1600–19001300–1500540–610
1,400,0200,022---1600–19001300–1500540–610
1,500,0200,0220,05--1600–19001300–1500540–610
1,600,0230,026---1600–19001300–1500540–610
1,700,0230,026---1600–19001300–1500540–610
1,800,0230,026---1600–19001300–1500540–610
1,900,0230,026---1600–19001300–1500540–610
1,975-0,026---1600–19001300–1500540–610
2,000,0250,0280,06--1600–19001300–1500540–610
2,20-0,028---1600–19001300–1500
2,40-0,028---1600–19001300–1500
2,50-0,030,06--1600–18001300–1500
2,60-0,03---


2,80-0,03---


2,97-0,03---

3,00-0,030,075--1600–1800

3,20-0,034---

3,50-0,034---


3,80-0,034---

4,00-0,034---


4,50-0,034---


5,03-0,04---

Manufactured Parts Inquiry Form

For business and private customers – We manufacture your product, from single parts to series production. Choose the desired material type and thickness from our extensive material portfolio. In addition to standard sheet metal thicknesses, we also stock thick materials, non-ferrous metals, and plastics. Your uploaded data (sketch, drawing, DXF, STEP, or similar formats) will be reviewed by our team of experts. If we have any questions or suggestions for optimization, we will contact you to achieve a result that is both technically and economically optimal.

Laserschneiden

Fine Laser Cutting & Laser Cutting

Precision manufacturing for thin metals and foils – ideal for delicate contours and precisely fitting components up to a maximum material thickness of 2.0 mm. Suitable for the production of shims, sheets, spacer foils, springs, and other demanding precision parts. High dimensional accuracy, clean cut edges, and consistent, reproducible quality – from single parts to series production.

Waterjet Cutting

Precise separation of metals and other materials using high-pressure waterjet technology. The process is gentle on materials and completely free of thermal influence, ensuring that no changes to the material structure occur. Ideal for complex contours as well as thick workpieces up to a maximum material thickness of 100 mm – suitable for both single-part and series production.

Slit Coils & Cut-to-Length Strips

Precisely cut precision gauge strips with thicknesses from 0.03 to 1.0 mm, made from various materials. Widths up to 300 mm (DC04 & non-ferrous metals), up to 600 mm (1.1274, 1.4404), and up to 1,250 mm for 1.4310 – depending on the starting material. Minimum length approx. 50 m; for thicknesses above 0.80 mm, shorter lengths are also possible. Optional with deburred edges, cut-to-length, self-adhesive tape, or packaging in plastic or metal containers.

Material
This field is required
Konfiguration
Rechteck-1 Vorschau
Rechteck-2 Vorschau
Rechteck-3 Vorschau
Spaltband Vorschau
Ring-2 Vorschau
Ring-1 Vorschau
Rahmen-1 Vorschau
Rahmen-2 Vorschau
Rahmen-3 Vorschau
Oval-1 Vorschau
Oval-2 Vorschau
Scheibe-1 Vorschau
Scheibe-2 Vorschau
Shim-1 Vorschau
Hinweis: Um DXF & STP Dateien hochladen zu können wählen Sie bitte im unteren Bereich "Alle Dateien" aus.
hinweisDateiUpload2
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Hinweis: Mindestlänge ca. 50 m, bei Stärken über 0,80 mm auch kürzere Längen möglich. Optional mit entgrateten Kanten, Ablängen, Selbstklebeband oder Verpackung in Kunststoff- oder Blechdosen.
Kontaktdaten

Do you have any questions? Our experts will be happy to assist you.

Schreiber Florian
Schreiber Florian
Sales & Technical Engineering

We support you personally with your inquiry – from technical evaluation to an economically efficient implementation. Get in touch with us, and together we will find the right solution for your component.

Service Hotline

Telephone support and personal consultation:

+49 9471 318 9905

Mon–Thu, 9:00 a.m.–3:00 p.m., Fri, 9:00 a.m.–12:00 p.m. (CET)

Outside business hours, please contact us at

info@metallstore24.de

Product information "Stainless Steel Sheet - Foil (316L - hard) ca.100 x 1000mm"

This stainless steel or spring band steel is very corrosion-resistant due to an addition of molybdenum and an increased nickel content and is suitable for use in the food industry as well as in the environment and medical technology.

The material 1.4404 is very easy to weld like other austenitic stainless steels. The heat input in the hard-rolled state can lead to a vascular change at the weld seam, which reduces the strength there.

Other uses/properties:

  • Welded endless belts
  • Conveyor belts in a corrosive environment
  • can be easily punched
  • can be deep-drawn (in the annealed state)
  • very well etchable
  • Slightly magnetizable
DIN Material - Name: X2CrNiMo18-12-2
Delivery - State: hard rolled
Length: 1000 mm
Magnetisable: weakly
Material - Number: 1.4404
Structure: cold rolled, not hardenable
Surface: 2H
Tensile Strenght: hard rolled
Thickness: 0,01 mm
Thickness Tolerance: DIN EN 9445 Table 1
Width: 100 mm
Material: Spring Steel
ASTM/AISI (USA): 316L
Norm: DIN 10204
Responsible company
Metall Ehrnsberger GmbH
Uferstraße 44
93158 Teublitz
Germany
info@metallstore24.de
Link to Metall Ehrnsberger GmbH
094713189905
Responsible person
Florian Schreiber
Uferstraße 44
93158 Teublitz
Germany
info@metallstore24.de
094713189905

4 of 4 reviews

100%

0%

0%

0%

0%

Leave a review!

Share your experiences with other customers.

4 4 reviews

18 September 2025 09:55

Schnelle Lieferung - gut verpackt - Material einwandfrei

Schnelle Lieferung - gut verpackt - Material einwandfrei

22 July 2025 07:57

Totul a fost perfect

Ideal sr fi sa se trimita certificatul de calitate impreuna cu factura.

12 December 2024 12:50

Schnelle Lieferung - gut verpackt - Material einwandfrei

Schnelle Lieferung - gut verpackt - Material einwandfrei

8 April 2024 18:21

Alles bestens. Gerne wieder.

Alles war bestens. Sehr schnelle Lieferung.

PaybyBank u.v.m.
This website uses cookies to ensure the best experience possible. More information...