Copper Foils (2.0070) 150 x 500 mm - (5 pc./PU)
The alloy SE-copper58 is with a copper content of min. 99.95%, a low oxygen and phosphorus content of higher quality than the commonly used copper grades E-Cu and SF-Cu. This material is used in general electrical engineering such as cable ties and connectors, transformer coils, semiconductor carriers and stamped and bent parts. Other applications / properties: Heat circuit boards Heat exchangers Vacuum technology very good etchable well suited for inert gas welding very suitable for soldering
Content: 0.375 m² (€196.48 / 1 m²)
Brass plate (CW612N) - thickness 10 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Thickness Tolerance: 0/+1mm Application / Features Most used alloy for machining Very suitable for hot forming Very good malleability Application: Automotive, components of electrical engineering, screws, clamps etc ...
Bronze Foil CW452K 150 mm x 5 Meter
Bronze Foil - Bronze Sheet Bronze is an alloy of copper (Cu) and tin (Sn). A distinction is made between wrought and cast alloys depending on the processing. Typical application examples are connectors, contact pins, as well as general stamped and bent parts and springs, where good electrical conductivity is necessary In contrast to brass, bronze can also be used in vacuum technology. Properties material CW452K - 2.1020 The bronze alloy CW452K - also called two-alloy - is the most frequently used type of bronze with a tin content of approx. 6%. The alloy CW452K is characterized by a particularly favorable combination of cold formability, strength and hardness. In addition, bronze is very corrosion and wear-resistant as well as seawater-resistant and has good tinnability. Technical information Bronze cannot be magnetized and therefore cannot be clamped on grinding machines. Bronze plates can be laser cut well and are very easy to etch. CuSn6 is easy to weld with all processes. However, the heat input at the weld seam can lead to a structural change that reduces the strength. Bronze is very suitable for soft soldering. The high strength of the bronze plates or the material is achieved by cold forming during rolling. Therefore, the direction of rolling has a great influence on bending. Other applications / properties: good corrosion resistance easy to solder easy to polish good cold formability good spring properties Use: springs of all kinds, metal hoses, etc. Application: paper, pulp, textile and chemical industry as well as in ship, machine and apparatus construction, tombstones
Content: 5 Meter (€19.06 / 1 Meter)
Copper Disc (CW004A) t = 5 mm
Diameter from Ø50 mm to Ø300 mm selectable Outer diameter turning - Tolerance: ± 0.5mm Due to the manufacturing process, discs are not free of traces of processing. Follow-up treatment of the surface may be necessary! Copper ETP is an oxygen-containing copper with a high conductivity (400 W / (m * K)) for heat and electricity. It can also be formed extremely well. The strength in the recrystallized state is <200 N / mm². Due to the residual oxygen content, which can lead to hydrogen embrittlement, the material is not suitable for welding. However, the solderability is excellent. Components for electrical engineering, electronics and architectural applications are manufactured from copper ETP with the EN designation CW004A. Manufacturing properties Cold formability: excellent Hot formability: excellent Soft soldering: excellent Brazing: good Autogenous welding: not recommended Inert gas welding: sufficient Resistance welding: not recommended Machinability: not recommended Use: architecture Gutters Roofing Electrodes for electric welding machines Heat exchanger Windings for motors Generators cables and wires Kitchen supplies to shine
Brass Foil CW508L 150 mm x 5 Meter
With a composition of copper and zinc, this material is the standard grade for spring-rolled brass for leaf springs, connectors and stamped and bent parts. Other applications / properties: Components of electrical engineering Components precision mechanics (watch industry) very good punched good etchable very good for hard and soft soldering
Content: 5 Meter (€16.51 / 1 Meter)
Copper sheet (CW024A) - thickness 1.0 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Application / Features Very good cold and hot forming material Excellent for mechanical and electro-chemical polishing Electroplated and suitable for immersion tinning Very good suitability for hard and soft soldering, gas and inert gas welding Industrial use in fittings and evaporators
Brass Sheet (2.0321) ca.300 x 1000 mm
With a composition of copper and zinc, this material is the standard grade for spring-rolled brass for leaf springs, connectors and stamped and bent parts. Other applications / properties: Components of electrical engineering Components precision mechanics (watch industry) very good punched good etchable very good for hard and soft soldering
Bronze sheet (CW452K) t = 3.0 mm
Bronze Sheet - Bronze Plate Length and width in mm - freely configurable steps - Tolerance cut: +/- 1mm Bronze is an alloy of copper (Cu) and tin (Sn). A distinction is made between wrought and cast alloys depending on the processing. Typical application examples are connectors, contact pins, as well as general stamped and bent parts and springs, where good electrical conductivity is necessary In contrast to brass, bronze can also be used in vacuum technology. Properties material CuSn6 - 2.1020 The bronze alloy CuSn6 - also called two-alloy - is the most frequently used type of bronze with a tin content of approx. 6%. The alloy CuSn6 is characterized by a particularly favorable combination of cold formability, strength and hardness. In addition, bronze is very corrosion and wear-resistant as well as seawater-resistant and has good tinnability. Technical information Bronze cannot be magnetized and therefore cannot be clamped on grinding machines. Bronze plates can be laser cut well and are very easy to etch. CuSn6 is easy to weld with all processes. However, the heat input at the weld seam can lead to a structural change that reduces the strength. Bronze is very suitable for soft soldering. The high strength of the bronze plates or the material is achieved by cold forming during rolling. Therefore, the direction of rolling has a great influence on bending. Other applications / properties: good corrosion resistance easy to solder easy to polish good cold formability good spring properties Use: springs of all kinds, metal hoses, etc. Application: paper, pulp, textile and chemical industry as well as in ship, machine and apparatus construction, tombstones
Copper sheet (CW024A) - thickness 2.0 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Application / Features Very good cold and hot forming material Excellent for mechanical and electro-chemical polishing Electroplated and suitable for immersion tinning Very good suitability for hard and soft soldering, gas and inert gas welding Industrial use in fittings and evaporators