Diameter from Ø50 mm to Ø300 mm selectable
Outer diameter turning - Tolerance: ± 0.5mm
Tolerance thickness: +/-0,8mm
Die Scheiben bzw. Ronden sind Aufgrund der Fertigung nicht frei von Bearbeitungsspuren. Eine Nachbehandlung der Oberfläche ist ggf. notwendig!
Copper ETP is an oxygen-containing copper with a high conductivity (400 W / (m * K)) for heat and electricity. It can also be formed extremely well. The strength in the recrystallized state is <200 N / mm².
Due to the residual oxygen content, which can lead to hydrogen embrittlement, the material is not suitable for welding. However, the solderability is excellent.
Components for electrical engineering, electronics and architectural applications are manufactured from copper ETP with the EN designation CW004A.
Manufacturing properties
- Cold formability: excellent
- Hot formability: excellent
- Soft soldering: excellent
- Brazing: good
- Autogenous welding: not recommended
- Inert gas welding: sufficient
- Resistance welding: not recommended
- Machinability: not recommended
Use:
- architecture
- Gutters
- Roofing
- Electrodes for electric welding machines
- Heat exchanger
- Windings for motors
- Generators
- cables and wires
- Kitchen supplies
- to shine
| Material: | Copper |
| Thickness: | 8 mm |
| EN Material - Name: | CW024A |
| DIN Material - Name: | Cu-DHP |
| Alloy: | Cu-DHP (SF-Cu) |
| Material - Number: | 2.0090 |
| ASTM/AISI (USA): | C12200 |
| Surface: | cold-rolled |
| Delivery - State: | half-hard R240 |
wunderbare energetische Übertagungsleistung für meine Zwecke sowohl Cu-ETP- als auch Cu-HCP-Scheibe. funktioniert einwandfrei. Sehr schnelle Lieferung. Wer so etwas braucht, wird hier richtig gut bedient.
