Spring Steel Sheet (301) 300 x 1000 mm
Stainless Spring Steel Sheet Precision sheets or metal foils made of spring steel CrNi - hard steel - 301 are used inter alia. in mechanical engineering as underlay foils, for aligning workpieces in grinding machines, adjusting games (assembly of workpieces) or measuring gap dimensions. Properties material 301 With this material, high strength is achieved by cold rolling. Compared to material 301, a much higher tensile strength can be achieved. Therefore, the material is very well suited for stainless precision gauges and shims as well as for stainless springs and parts with higher strength. Due to the alloy with chrome and nickel, this spring steel has good corrosion resistance. Material 1.4404 should be used in a corrosive environment. If no special requirements are placed on corrosion, the material 1.1274 can also be used. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3 (for strength class 15-1700 N / mm²). Like other austenitic stainless steels, this steel is very easy to weld. However, the heat input at the weld seam can lead to a structural change (which reduces the strength) and, among other things, local corrosion of the weld seam. With material 1.4310, when bending or bending, make sure that the bends should always run across the rolling direction. When used as a flat spring, the rolling direction must also be observed. Further technical information on our cold-rolled spring steel 1.4310 can be found in our data sheet. Further applications / properties: Welded endless belts conveyor belts very easy to etch weakly magnetizable good corrosion resistance
Stainless steel foil (304) - thickness 0.2 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Properties: good weldability (all electrical processes), good deformability through deep drawing, bending and roll forming, very good polishability, acid-resistant Processing / Welding: TIG welding, arc welding (E), MAG welding, solid wire, UP welding, laser welding Application: Construction, Chemical Industry, Decorative and Kitchen Equipment, Electronic Equipment, Petroleum Industry / Petrochemical Industry, Food Industry, Container Construction, Architectural Elements
Brass plate (CW508L) - thickness 5 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Application / Features Standard alloy for brass sheets Very suitable for cold forming by deep-drawing, pressing, compressing, rolling, thread rolling, embossing and bending Good solderable and weldable Electrolytically polishable Application: contact parts in switches, sockets and relays, metal hoses, model railroad tracks, parts for brass instruments, etc ...
Feeler gauge strip (301) 12,7 mm x 5 Meter
Precision feeler gauge tape Precision tapes or metal foils made of spring steel CrNi - hard steel - 301 are used inter alia. in mechanical engineering as underlay foils, for aligning workpieces in grinding machines, adjusting games (assembly of workpieces) or measuring gap dimensions. Properties material 301 With this material, high strength is achieved by cold rolling. Compared to material 301, a much higher tensile strength can be achieved. Therefore, the material is very well suited for stainless precision gauges and shims as well as for stainless springs and parts with higher strength. Due to the alloy with chrome and nickel, this spring steel has good corrosion resistance. Material 1.4404 should be used in a corrosive environment. If no special requirements are placed on corrosion, the material 1.1274 can also be used. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3 (for strength class 15-1700 N / mm²). Like other austenitic stainless steels, this steel is very easy to weld. However, the heat input at the weld seam can lead to a structural change (which reduces the strength) and, among other things, local corrosion of the weld seam. With material 301, when bending or bending, make sure that the bends should always run across the rolling direction. When used as a flat spring, the rolling direction must also be observed. Further technical information on our cold-rolled spring steel 301 can be found in our data sheet. Further applications / properties: Welded endless belts conveyor belts very easy to etch weakly magnetizable good corrosion resistance
Content: 5 Meter (€11.96 / 1 Meter)
Stainless Steel Sheet - Foil (316L - hard) ca.300 x 1000mm
This stainless steel or spring band steel is very corrosion-resistant due to an addition of molybdenum and an increased nickel content and is suitable for use in the food industry as well as in the environment and medical technology. The material 1.4404 is very easy to weld like other austenitic stainless steels. The heat input in the hard-rolled state can lead to a vascular change at the weld seam, which reduces the strength there. Other uses/properties: Welded endless belts Conveyor belts in a corrosive environment can be easily punched can be deep-drawn (in the annealed state) very well etchable Slightly magnetizable
Copper sheet (CW024A) - thickness 3.0 mm
Length and Width in mm - Steps individually configurable Cutting Tolerance: ± 1mm Application / Features Very good cold and hot forming material Excellent for mechanical and electro-chemical polishing Electroplated and suitable for immersion tinning Very good suitability for hard and soft soldering, gas and inert gas welding Industrial use in fittings and evaporators
Spring Sheet 301 - 500 x 100 mm
Precision Spring Steel Strip Precision tapes or metal foils made of spring steel CrNi - hard steel - 301 are used inter alia. in mechanical engineering as underlay foils, for aligning workpieces in grinding machines, adjusting games (assembly of workpieces) or measuring gap dimensions. Properties material 301 With this material, high strength is achieved by cold rolling. Compared to material301, a much higher tensile strength can be achieved. Therefore, the material is very well suited for stainless precision gauges and shims as well as for stainless springs and parts with higher strength. Due to the alloy with chrome and nickel, this spring steel has good corrosion resistance. Material 1.4404 should be used in a corrosive environment. If no special requirements are placed on corrosion, the material 1.1274 can also be used. Technical information The thickness tolerance is defined according to DIN EN 9445 table 1 or T3 (for strength class 15-1700 N / mm²). Like other austenitic stainless steels, this steel is very easy to weld. However, the heat input at the weld seam can lead to a structural change (which reduces the strength) and, among other things, local corrosion of the weld seam. With material 1.4310, when bending or bending, make sure that the bends should always run across the rolling direction. When used as a flat spring, the rolling direction must also be observed. Further technical information on our cold-rolled spring steel 1.4310 can be found in our data sheet. Further applications / properties: Welded endless belts conveyor belts very easy to etch weakly magnetizable good corrosion resistance
Content: 0.05 m² (€718.80 / 1 m²)
Bronze Disc (CW452K) t = 4 mm
Diameter from Ø50 mm to Ø290 mm selectable Outer diameter turning - Tolerance: ± 0.5mm Due to the manufacturing process, discs are not free of traces of processing. Follow-up treatment of the surface may be necessary! Application / Features Good corrosion resistance Good solderable Good cold deformability Good spring properties Use: springs of all kinds, metal hoses, etc... Application: paper, pulp, textile and chemical industry as well as in ship, machine and apparatus construction
Knife steel sheet hardened (420) 1000 x 360 mm
" The advantages of this steel are its good wear resistance and minimal internal stress. With a Rockwell hardness of 49-53 HRC, this material is ideal for gauges, tools and machine knives in the food industry and scalpels. This special steel is corrosion-resistant in moist air, steam and water and should not be welded if possible, since the martensitic chrome steels are air-hardening. The material 1.4034 is magnetizable and can therefore be clamped on the magnetic clamping plates of grinding machines. Other uses/properties: Sawing in the food industry Fabric knife Wear rails Print Crackers Brake discs very well etchable magnetisable "